Pelco - Spectra® IV IP SE with H.264 27X pendant mount, light grey back box and gold bubble. NTSC. Consists of the following Pelco components: DD427, BB4E-PG, LD53PB-3.

Pelco
Part Number #: SD4E27-PG-3 CTI #: SD4E27-PG-3
$2,513.99
Quantity:
Spectra IV IP dome systems incorporate all of the features and functions of Spectra IV (including analog), while allowing you to control and monitor video over an IP network from virtually anywhere in the world. Spectra IV IP is a high-speed dome with a built-in 100Base-TX network interface for live streaming to any network application. All cameras in Spectra IV IP dome drives feature an EXview HAD imager for increased sensitivity and LowLight technology allowing the cameras to compensate for scenes where minimal light is present. Both the 27X and the 35X cameras feature built-in motion detection and advanced 128X wide dynamic range (WDR) that enables the system to compensate for scenes where dramatic contrasts in lighting are present. The 35X day/night camera's electronic image stabilization digitally reduces blurring of the camera image due to vibration caused by external sources, such as wind and traf?c.

Features
  • Ability to Control and Monitor Video Over IP Networks
  • Simultaneous IP and Analog Video and Control
  • H.264, MPEG-4, and MJPEG Compression
  • Supported Protocols: TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, and NTP
  • Multilevel Password Protection
  • 3 Autofocus, High Resolution Integrated Camera/Optics Packages
  • Horizontal Zone and Window Blanking
  • Sensitivity Down to 0.00015 lux PAL (35X Models)
  • On-Screen Compass and Tilt Display Up to 2 Simultaneous Video Streams
  • Web Viewing, up to 16 Cameras Simultaneously
  • Dual Wall Construction
  • Built-in Memory Stores Camera/Dome Settings
  • Requires 5.25-Inch Space Above Ceiling and 3.25 Inches Below
  • Heavy-Duty Polycarbonate Dome Bubble
  • Optional Protective Cage

    Specs
  • Manufacturer Pelco
  • Condition New
  • Signal Format NTSC (DD427), PAL (DD427-X)
  • Scanning System Interlace/Progressive selectable
  • Image Sensor 1/4-inch EXview HAD
  • Lens f/1.4 (focal length, 3.4 ~ 91.8 mm)
  • Zoom 27X optical, 12X digital
  • Zoom Speed (optical range) 3.2/4.6/6.6 seconds
  • Horizontal 55.8° at 3.4 mm wide zoom
  • Angle of view 2.3° at 91.8 mm telephoto zoom
  • Focus Automatic with manual override
  • Video Encoding H.264 base pro?le, MPEG-4, and MJPEG
  • Video Streams Up to 2 simultaneous streams; the second stream is variable based on the setup of the primary stream
  • Frame Rate Up to 30, 25, 24, 15, 12.5, 12, 10, 8, 7. 5, 6, 5, 4, 3, 2, 1 (dependent upon coding, resolution, and stream con?guration)
  • Security Access Password protected
  • Software Interface Web browser view and setup, up to 16 cameras
  • Pelco System Integration Endura 1.5 or later (MPEG-4) or Endura 2.0 or later (H.264); Digital Sentry 4.2 IP bundle 3 or later; DX8100 Series 2.0 or later; and DVR5100 version 1.5.4 or later
  • Open IP Integration Pelco IP camera API
  • Processor Intel Pentium 4 microprocessor, 1.6 GHz
  • Operating System Microsoft Windows XP, Windows Vista, or Mac OS X 10.4 (or later)
  • Memory 512 MB RAM
  • Network Interface Card 100 megabits (or greater)
  • Monitor Minimum of 1024 x 768 resolution, 16- or 32-bit pixel color resolution
  • Web Browser Internet Explorer 7.0 (or later) or Mozilla Firefox 3.0 (or later)
  • Media Player QuickTime 7.6.5 for Windows XP, Windows Vista, or QuickTime 7.6.4 for Mac OS X 10.4
  • Maximum 113°F (45°C) absolute maximum; 95°F (35°C) sustained maximum
  • Minimum 25°F (-4°C) sustained minimum
  • Ports RJ-45 connector for 100Base-TX Auto MDI/MDI-X Autonegotiate/Manual setting
  • Cabling Type Cat5 or better for 100Base-TX
  • Input Voltage 18 to 32 VAC; 24 VAC nominal 22 to 27 VDC; 24 VDC nominal
  • :

    product information